Why iPad does not turn on: reasons and ways of elimination

The American brand Apple is well-known for its popular image devices that are marketed as examples of reliability and durability. However, it is important to remember that these devices are ultimately products made by human hands. Therefore, it is not uncommon for users to encounter situations where their iPad does not turn on. Rather than panicking and rushing to an expensive repair service center, it is worth exploring some troubleshooting methods that can be easily performed by individuals, even without any specialized knowledge.

The most common cause

Oddly enough, battery drain is the most common cause of an iPad not turning on. Users often forget about their tablet and leave it in active display mode. In this scenario, when attempting to power on the device, the Apple logo briefly appears then disappears. After a significant battery drain, it is important to give the tablet enough time to fully recharge. When plugging in the power adapter, the screen may not show any activity for a period of time. This is because the iPad’s battery voltage level is too low to start the hardware platform. Once the battery level has sufficiently replenished, the iPad will display a charging indicator.

Problems with the button and incompatible hardware

One common reason for the iPad not powering on is a malfunctioning hardware button. Verifying this is quite simple. Simply connect the tablet to a power adapter. If the iPad charges but fails to turn on, it is most likely necessary to seek assistance from a service center to replace the power button. When it comes to incompatible power adapters, the situation becomes much simpler. The iPad’s hardware platform is finely tuned, allowing the control system to detect and notify the user if the connected adapter or other equipment is not compatible. This can result in the tablet becoming discharged and unable to power on. In such cases, it is necessary to purchase a new charging adapter or visit a service center for a complete repair.

If you encounter an issue where the apple logo appears briefly on the tablet’s screen before disappearing, and connecting the charging adapter doesn’t solve the problem, it may be worth investigating the power transfer circuit. This is a relatively simple task that can be done to troubleshoot the issue.

Problems with the cable

The cable connecting the tablet to the power adapter should not be bent or physically damaged, even from impact or deformation that doesn’t break the protective coating. This part of the circuit is often targeted by pets who may accidentally catch the cable under furniture or cause it to become deformed. If this happens, you may notice that your tablet has discharged and won’t turn on. Before conducting any checks, make sure to unplug the adapter. If any damage is visually noticeable or can be confirmed through testing, it’s time to either purchase a new charger or take it to a service center for repair.

Tip: Another way to identify a faulty cable is if it heats up in a particular area or if there are signs of carbon deposits.

Problems with the socket

Debris and dust can cause issues with charging and even lead to failure of the iPad Air or other models. The condition of the charging port should be visually inspected. If any conductive objects, such as furniture clips or foil from a cigarette pack, are found, the device should be disconnected before removing them. Care should be taken when removing dirt from the port. After disconnecting the iPad 4, iPad mini, or any other model, the port can be blown out to ensure cleanliness.

Tip! It is recommended to use a special paper clip for cleaning out dirt. If one was not provided with the device, a wooden match or thin toothpick can be used as alternatives.

Emergencies

1. The screen displays stripes.
2. Upon turning on the device, it functions properly, but occasionally a black screen appears, which can be resolved by shaking.
3. The iPad may experience a short circuit or a disruption in the electronic component’s parameters, causing it to shut down and malfunction.

Please note! It is recommended to address issues with water ingress at an authorized service center. The design of the device is specifically designed to only allow disassembly by heating the case on a specialized stand, as seen in the case of the iPad Air and other modern models.

For owners of the iPad 2 or similar devices with a body assembled using bolts, attempting to clean the tablet’s internal components from water and contaminants can be done independently. Here are the steps to follow:

• Turn off the device.
• Remove the rear cover by unscrewing the bolts.
• Take out the battery and dry its terminals, then wipe them with alcohol.
• Gently blot any water droplets found on the motherboard, applying minimal pressure.
• Remove any water from the surfaces of the cables, paying special attention to the point where they are connected.

It is imperative to exclusively use pure alcohol when cleaning any surfaces within the tablet. The utilization of oils, perfumes, vodka, inhalation mixtures, and ammonia is strictly prohibited. It is essential to approach the cleaning process with caution and avoid applying excessive pressure. Once the cleaning is complete, allow the device to thoroughly air dry before reattaching the back cover and screwing it into place.

If the iPad tablet continues to not power on even after thorough cleaning, it is advisable to get in touch with a service center. Restoring the functionality of the tablet back to its normal state will not be achievable without a professional inspection of the hardware components.

Software problems

Fans of tweakers and enhancers frequently ask what to do if their iPad won’t turn on. Installing such software can lead to various reactions from the operating system, such as:

• The iPad getting stuck on the apple logo;
• The device entering a cyclic reboot after the update;
• The iPad unexpectedly shutting off during use.

If your iPad tablet is unresponsive or won’t turn on, you have several options to try:

• Press the volume up button, then the volume down button, and quickly press the power button in succession.
• Press the volume down button, then the volume up button, and press the side button.
• Simultaneously press the side button and the volume down button.
• Hold down the hardware home button and the side button (or top button on certain models) for over 10 seconds.

By performing these steps, you can initiate a restart of the iPad and attempt to uninstall the malfunctioning application. This process does not result in the loss of user data, including saved photos and music. However, there may be instances where the iPad fails to power on even after a successful reboot, despite the normal display of the logo on the screen.

Re-flashing the operating system

One option for resolving the issue of an iPad not turning on is to completely reinstall the operating system. Apple assures that this method allows for the preservation of user data. To carry out this procedure, a personal computer is required. Follow these steps:

• Connect the iPad to the PC using a data cable;
• Wait for the charging indicator to appear;
• Ensure that the iPad is charged to at least 60%;
• If necessary, download and install the iTunes program on the PC and log in with your Apple ID and password;
• Force restart the iPad by using the specific combination mentioned in the previous section;
• Do not release the buttons when the Apple logo appears on the screen, instead, wait for the system recovery prompt.

Once the PC program identifies the maintenance mode, the user will have the option to select either recovery or update.

Tip! If the iPad tablet fails to power on, it is advisable to select the last option. By doing so, the system will attempt to install the latest OS version while preserving the user’s data.

Please note that there is a limited time frame for tablet updates. If integrity checks and data transfers exceed 15 minutes, the overwrite process will need to be repeated. To do this, start from the beginning and follow the aforementioned steps. If multiple attempts to update the system yield no positive outcome, it is recommended to seek assistance from a service center.

The best-selling iPads according to customers

Looking to buy an Apple iPad (2018) with 128GB of storage and both Wi-Fi and Cellular capabilities? Look no further than Yandex Market, where you can find great deals on this model!

If you don’t need as much storage or cellular connectivity, Yandex Market also has the Apple iPad (2018) with 32GB of storage and Wi-Fi only.

For those who prefer a smaller tablet, the Apple iPad mini 4 with 128GB of storage and Wi-Fi is also available on Yandex Market.