What can be made from an old bathtub?

Typically, when bathroom repairs are completed, the old bathtub is disposed of. However, if you tap into your creativity and put in a bit of effort, you can give new life to this unwanted item and transform it into an extraordinary art piece for your cottage or home.

What to make from an old bathtub on the dacha plot?

Transforming an old bathtub into a flowerbed is a great way to repurpose it for your dacha. Simply apply brightly colored products to the outer surface. Acrylic paints are recommended for their resistance to fading and the elements. You can choose to paint the bathtub in a single color or create any pattern you desire.

If you prefer to conceal the old container, you can partially bury it in the ground. Surround the edges with stones to mimic an alpine slide. Prior to filling the bathtub with soil, it is important to layer a thick drainage material and drill small holes in the bottom to prevent water accumulation and root rot.

For a truly impressive alpine slide, consider using a round-shaped bathtub.

Another unique option to consider is creating a pond. To achieve this, bury and secure the sanitary ware with a combination of natural and artificial stones. Utilize silicate glue, as it is resistant to moisture. For a visually pleasing result, ensure that the entire surface of the bathroom is covered in stones, with no metal visible.

Alternatively, if you prefer to avoid the hassle of using glue, you can paint the inner surface a dark color, dig it to ground level, and surround it with decorative stones.

Another idea is to construct a garden bench. Cut either the entire upper surface or a portion of it. To prevent the bench from feeling cold to the touch, add wooden bars to the horizontal seating surface.

The execution of the brazier is not a complex task.

Important note! For the successful implementation of this concept, it is advisable to choose a relatively small bathtub in terms of length. Otherwise, the resulting brazier might be too large in size.

Furthermore, in order for the product to operate effectively, it is crucial to create a handle that will facilitate the placement of a coal tray for cooking purposes. This handle should be welded at a midpoint of the bathtub’s height.

Subsequently, it will be necessary to weld the second side, as it will enable the installation of the brazier’s grill grate.

In order to turn a bathtub into an oven for a dacha plot, some effort is required. First, the cast-iron bathtub needs to be carefully cut in half, following precise measurements. On the oval-shaped end of the tub, a metal door should be installed. Canopies can be attached to the door for added convenience. Next, either electricity should be set up or a designated area for wood burning should be arranged. Finally, a grate should be placed in the tub so that food containers can be easily placed for cooking.

How to make a bed from an old bathtub

Creating a raised bed out of an old bathtub requires minimal effort. Simply position the bathtub in the desired area of the vegetable garden.

Important! To prevent the soil from shifting due to water, it is best to level the bathtub horizontally.

Drill evenly-spaced holes along the entire length of the bottom. These holes will allow excess moisture to drain, promoting healthy plant growth. Next, add a layer of drainage material followed by the soil.

Helpful tip! Avoid filling the soil up to the edge of the bathtub to prevent spillage.

How to make a decorative sofa

To transform a bathtub into a sofa, it is necessary to cut out the elongated front side surface. Apply a suitable color of paint to the remaining part. For a durable and visually appealing paint coating, it is recommended to first apply a metal primer. The legs of the sofa can be adorned with molded elements. To ensure a comfortable seating experience, sew special covers with a thick layer of foam padding. This will provide added softness.

Another option is to convert the bathtub into a love seat. This requires sawing out a majority of the side surface, while leaving one end with small bends. It’s important to make the front bend shorter in length, while the rear bend should be approximately 1/3 of the bathtub’s total length.

Afterwards, a series of steps resembling the assembly of a couch is carried out. This involves painting the interior and exterior surfaces as well as the legs. Following that, covers or cushions are sewn to provide a comfortable seating experience.

Furthermore, the possibility of creating armchairs also exists. Two chairs can be made from one sanitary product. To achieve this, the bathtub is measured and then divided in half. The necessary preparations are performed, including cleaning, primer application, and the application of the desired paint coating. Subsequently, the chair can be adorned with special covers or cushioned lining. If there is no intention for the product to have legs, it can be placed on top of a wooden box. This will cover up the legs of the old plumbing and create an aesthetically pleasing base.

Recommendations

Before starting any work on the old plumbing, it is important to first clean and degrease it. This initial step is crucial as it will ensure proper adhesion of the coating that will be applied later.

It is highly recommended to apply one or two layers of primer before painting in order to achieve a long-lasting and smooth finish. Each layer of primer should be allowed to fully dry before moving on to the next application.

If you desire a glossy surface, it is recommended to apply a special varnish over the paint coating. This three-layer painting technique not only enhances the appearance but also provides added durability, making it suitable for outdoor furniture or products exposed to harsh environmental conditions.