Case for headphones with your own hands

Many individuals own headphones, making them a popular device. It can be quite bothersome when the wires become tangled, causing frustration. To prevent this issue, one can easily and swiftly create a headphone case using materials that are readily available. This craft can be accomplished by any skilled individual who can handle a needle. A handmade accessory, such as this case, can help accentuate the owner’s personal style or be given as a special and unique gift to someone dear.

A headphone case made of felt in the form of an animal

If you are a fan of kittens, then you will absolutely adore this unique case that is shaped like an adorable little feline! To create this cutesy case, you will require the following materials:

• A pattern;
• Felt fabric in a suitable color;
• Thread;
• Two beads for the eyes;
• A sew-on button;
• A pair of scissors;
• A pen for tracing the pattern;
• Sewing thread;
• A hand sewing needle.

To begin, trace and cut out the cat-shaped pattern, making sure it is around 9 cm in height, on the felt fabric using a pen. Indicate where the tongue should be placed, as it will serve as the attachment point for the headphones to the figure. The rear part of the pattern includes ears, while the front does not feature them.

A tongue made from a material that resembles the color red is cut out. The upper part of the button is sewn onto the tip of the tongue. To secure it, a cut needs to be made in the front part of the pattern, and then it can be inserted and secured from the opposite side.

Mark the location where the second half of the button will be attached on the lower part of the figure and sew it on. Shape the face and nose, and sew on the eyes. Use brightly colored threads to stitch together the front and back parts of the figure with a buttonhole stitch. The cover is now complete.

If desired, the tongue can be replaced with a felt fish. In this case, the fish will hold the earphone in place within the case.

ABOUT! You have the ability to create a decorative item that mimics various animals, such as a bear, a rabbit, an owl, and more.

Handmade case of dense fabric with a lock

You have the option to choose any type of fabric. Denim, corduroy, drape, or any other dense material would work well for the front side. Thinner fabrics are suitable for the underside. It is recommended to find a zipper of the same color as the chosen front fabric.

The suggested case has a round wallet design and is small in size. To make it more convenient to carry, you can attach a ring to turn it into a stylish keychain for your bag. Here’s what you’ll need:

• Templates in the shape of circles with diameters of 11.5 cm and 12.5 cm.
• Dense fabric in one or two colors.
• A zipper that fits the size.
• A hanging ring.
• Scissors, pen, needles for puncturing, and a sewing machine.

1. Start by using a pen to transfer the templates onto the fabric. For the front side, the diameter should be 12.5 cm, and for the wrong side, it should be 11.5 cm.
2. Cut out 2 pieces for the front and 2 pieces for the back.
3. Take one front piece and one back piece and cut them each into 2 equal parts.
4. Using a sewing machine, sew the zipper along the cut line, making sure to align the front and back pieces.
5. Create a buttonhole (attachment for the ring) and sew it onto the circular pattern, aligning the front side with the back side.
6. Secure the finished parts together with pins, making sure to leave the zipper unzipped. Sew the parts together with a seam allowance of 0.5 cm.
7. To facilitate turning the case inside out, make notches along the circumference and trim off any excess parts of the zipper.
8. Take the item out by pulling it through the unzipped opening, flatten it, and sew the edge at a distance of 0.75 cm;
9. Insert the hanging ring into the loop.

Voila! The headphone case with a lock is now complete!

Stylish leather headphone case

An option for a case that offers both durability and style is one made from leather. This material is known for its long-lasting quality and fashionable appearance. To create a leather case, gather the necessary materials including a leather flap, felt, "Moment" glue, thread, needle, pen, and a pattern.

**ATTENTION!** The shape of the cover is completely up to the author’s imagination. However, in order to easily fit and remove the skein, it is recommended to choose a round shape.

To create the circular cutout, trace a circle onto a piece of leather and cut out two identical parts. Carefully cut one of the leather circles in half.

Using glue, attach the cutout pieces to the back side of a felt material. Allow the glue to dry, then cut out the cover parts. Finish off the edges with a buttonhole stitch.

To complete the project, it is essential to securely stitch together the free edges of the pieces using a buttonhole stitch, ensuring that the knots are concealed within the felt and leather. It is crucial to exercise caution as puncturing the leather will leave visible needle marks, so precision is key.

Once the free edges of the pieces are stitched, position the semicircles on the circular element, aligning their edges. Use a buttonhole stitch to attach the semicircles to the circular element. If you want to embellish the cover with beads, thread the needle through a bead at each stitch.

Once all the parts are connected along the perimeter, it is recommended to conceal the knots on the felt side.