Blueprints and schemes of the sofa-euroknizhka with their own hands

Foldable furniture is favored by both individuals with small apartments and those with luxurious apartments. The sofa with a eurobook design offers numerous benefits over other models: the sleeping area has minimal sagging, the structure is sturdy and functional.

How to make a sofa euroknizhka with your own hands

The sofa’s main characteristic is its ability to remain immobile during both assembly and disassembly. This is achieved by sliding the upper section and lowering the backrest into the resulting empty space.

To enable the movement of the seat, special fittings can be added. However, when assembling the sofa at home, recesses can simply be made in the side supporting bars, and the legs can be directly attached to the seat. The backrest is assembled using non-disassembling hinges.

The sofa design includes a box base with a drawer for bedding and can be equipped with either two armrests or one, allowing the product to be used as a corner sofa.

Important notice! The furniture occupies minimal space since it does not necessitate any specific wall distance for assembly/disassembly. Furthermore, once the sofa is extended, a considerably spacious sleeping area emerges.

To construct the frame, you will need the following materials:

• plywood panels;
• CHIPBOARD;
• self-tapping screws;
• timber measuring 50×50 and 25×50 mm;
• nails;
• metal corner plates;
• rollers and guides;
• steel angle legs;
• batting or foam.

The necessary tools for assembling the frame are:

• electric drill;
• sandpaper;
• jigsaw;
• hammer;
• chisel;
• screwdriver;
• furniture stapler;
• stain;
• marker;
• tape measure.

How to take measurements

Calculating the euroknizhka’s dimensions accurately is much simpler compared to corner sofas because there’s no need to consider additional elements. The sofa is divided into equal parts by a single line. Since the sleeping area runs along this line, it’s barely noticeable.

When choosing a euroknizhka, it’s important to consider the size of the bed both when folded and unfolded, as the sofa doubles in size when opened up. Typically, a standard width of 140-150 cm and a length of 180-210 cm when unfolded are chosen.

To begin the assembly of the bed, it is essential to have a detailed diagram that is tailored to individual preferences. Ready-made templates can also be utilized.

The diagram should prominently display the overall dimensions of the finished bed, as well as the dimensions of each individual component. Additionally, it is crucial to indicate the placement of the hinges so that reinforcement bars can be installed in the appropriate locations for added strength. Furthermore, the precise positioning and height dimensions of all elements, including the legs, must be accounted for.

Attention! In the regular versions, the base is equipped with four legs and the folding part has two.

Sofa euroknizhka independently: step-by-step instructions

If you want to assemble a euroknizhka sofa correctly, you need to follow these directions:

1. Foundation. The first step in assembling the euroknizhka is to assemble the foundation. This can be done using bars with a cross-section of 15×5. Typically, a frame size of 80×200 cm is chosen. The bars are connected to each other using self-tapping screws, and additional boards are attached to the corners for extra stability.
2. Base. The bottom of the frame is typically made using a sheet of chipboard. To secure it, saw laths are used on the foundation, and the chipboard is fixed on top of them.
3. Chair and backrest. These components are also made of 15×5 cm bars. The manufacturing process is the same as for the bed frame, with dimensions of 80×200 cm. Chipboard sheets should be attached on both sides of these parts.
4. When the assembled design is in a vertical position, the soft part of the backrest faces outward. To add more softness, it is necessary to use polyurethane foam cushions wrapped in a material.
5. The side parts of the bed can be made of a wooden box or fiberboard.
6. For the folding mechanism, hinges are used to easily fold and unfold the bed. These hinges are fixed to the backrest and directly to the bed. To ensure durability, a board of 15×5 cm can be used instead of bars to secure the hinges on the back of the bed.
7. After preparing and assembling all the elements of the bed, attach the polyurethane foam using a special adhesive composition. Then, lay batting or syntepon for added comfort. Finally, upholster the finished euroknizhka bed with fabric using a furniture stapler.
8. The joists between the two sheets of plywood can be glued and secured on both sides using a construction stapler.
9. Rather than using chipboard, it is common to opt for solid plywood sheets that are 5 mm thick. Additionally, the thickness of the planks can be reduced to 25 mm.
10. The sofa cover can be made with a zipper, or the material can be stapled to the boards underneath. Upholstering the bed does not require a significant amount of time.
11. For the upholstered portion of the bed, it is advisable to select a synthetic material with a density exceeding 25 kg/m2. Attach a 12 cm thick foam to one section of the backrest, and a 3 cm thick foam to the other section.